OSIO S20
Compact I/O module with 10 inputs / 10 outputs and CAN Bus + LIN communication.
Technical Specifications
| Processor | |
|---|---|
| Microcontroller | 32-bit Arm Cortex-M4 @168 MHz |
| Secure Firmware | TF-M 2.1.0 |
| Functional Safety | ISO 26262-Ready |
| Input Channels | |
| Total Inputs | 10 (configurable) |
| Current Input (0-25 mA) | 4 channels |
| Voltage Input (0-32 VDC) | 8 channels |
| NTC (5/10/47K) | 8 channels |
| PT1000 (1K) | 4 channels |
| Frequency Input | 8 channels |
| Internal Pull-up | 10 channels |
| Output Channels | |
| Total Outputs | 10 (configurable) |
| PWM Half Bridge | 4 channels |
| High-Side Switch | 6 channels |
| Power | |
| Operating Voltage | 8-36 VDC |
| Output Power | 36-40 W @12V (72-80 W @24V), depending on output |
| Sensor Supply | 5-12 V / 500 mA (selectable) |
| Communication | |
| CAN Bus | 1× · 1 Mbit/s (CANopen, SAE J1939) |
| LIN | 1× · master/slave (LIN 2.x, SAE J2602-1) |
| Mechanical | |
| Enclosure | IP54, aluminium |
| Dimensions | 125 × 53,5 × 111 mm |
| Weight | ~375 g |
| Operating Temperature | -40°C / +85°C |
| Connector | TE AMP 1-967622-3 / 1-967625-3 |
| Safety & Protection | |
| Overvoltage (OVP) | ±36 V |
| Protections | OCP · OTP · ESD · ters polarite (RVP) |
| Diagnostics | Open load / short circuit (OLD-SCP) |
| Bus Robustness | CAN ±36V · LIN ±45V |
Features
- Every channel is independently programmable: digital I/O, PWM, frequency, analogue measurement, high/low-side driver
- Programming with OS-SMART IO PROGRAMMER: C, MicroPython, JavaScript, Ladder, FBD
- All outputs are ISO 26262-Ready; TF-M 2.1.0 secure firmware
- Open load / short circuit diagnostics and real time load current measurement
- CANopen and SAE J1939 protocol support; LIN master/slave selectable
- IP54 aluminium enclosure; automotive type TE AMP connectors
Application Areas
- Body control modules (BCM)
- HVAC and climate control systems
- Lighting, signalling and auxiliary equipment control
- Equipment management in ambulances, caravans and special vehicles
- Control of inductive loads such as door, ramp and window motors
- Smart control of pumps, valves and actuators
- Monitoring and control of inductive and resistive loads
